Using a Spray Bottle
Fill a spray bottle with a solution of bleach and water. To use a spray bottle to create your acid wash t-shirt, you will need to fill up a spray bottle with a solution of bleach and water. The solution should be 50% bleach and 50% water.
Lay your t-shirt in an empty sink or on concrete. It is important to place your t-shirt somewhere that it will not come into contact with things that might become discolored from the bleach. Placing the t-shirt into a sink or on a slab of concrete outside are both good options. Make sure that the t-shirt is lying flat, and it is not crumpled or wrinkled. This will help to ensure that you can spray as much of the t-shirt as possible.
Spray the t-shirt where you want. When your t-shirt is in position, begin spraying it with your bleach solution. Spray the shirt all over, but make sure to leave some areas bleach free. You can also concentrate your bleach spraying to certain areas if you would like them to be lighter than others. Spray your shirt in a random pattern rather than trying to make a design. This will help to give your acid washed t-shirt it’s signature grungy look.
Wait for the bleach to develop. It will take a little while for your bleach to lighten the areas of the shirt that you sprayed. The longer you wait, the lighter certain areas of your shirt will be. Try to wait for at least 10 minutes to give the bleach time to work. If you like, you can also spray the shirt again after 10 minutes, and then wait 10 more minutes to rinse and wash. This will give your acid washed t-shirt some dimension.
Rinse the shirt and wash it. When you have finished spraying your t-shirt, and it has had enough time to develop, you will need to rinse the shirt and then wash it. Dunk the shirt into a sink or bucket full of water and then wring it ouhttps://www.madeeveryday.com/tutorial-acid-washed-tees/ If you want to rinse it again, don’t use the same water because this water will now be full of bleach it dipping it into the same water again may ruin your design.
Using a Bucket and Rubber Bands
Twist or crumple your t-shirt and secure it with rubber bands. Using the bucket method is similar to tie dyeing a shirt, only you do not have to worry about intricately placing your rubber bands or twisting the shirt in certain ways. Just crumple or twist the shirt however you like and then use the rubber bands to secure it into a ball.
Mix a solution of bleach and water in a bucket. You will need a 50:50 solution of bleach and water to create your acid washed t-shirt. Mix this solution in the bucket.
Dunk the t-shirt into the solution. Next, place the crumpled t-shirt into the solution and immerse it in the solution completely. Make sure that the t-shirt is soaked in the solution.
Take the shirt out of the solution and hang it up. Pull the t-shirt out of the solution and then remove the rubber bands. Then, hang up the shirt outside or somewhere that it can drip and dry. Do not hang the shirt over any areas that might get damaged by the bleach. Make sure to hang it up somewhere that it will be okay for it to drip.
Sprinkle pure bleach across the shirt to enhance the design. When you have finished hanging the shirt, let it dry for about 10 to 20 minutes, depending on how much you want the bleach to develop. Then, take a capful (or a couple of tablespoons) of pure bleach and sprinkle it on the front of the shirt. You can do this multiple times to get more dimension. Try sprinkling some bleach on, waiting 10 minutes, and then sprinkling bleach on again before rinsing and washing the shirt.
Rinse, wash, and dry the shirt before wearing. After you have finished letting your shirt develop, dunk it into a bucket or sink full of clean water, wring it out, and then toss it into the washing machine for a regular wash cycle. When it is done, just dry the shirt, and it is ready to wear!
Staying Safe and Getting the Best Results
Put on your protective gear. Bleach is caustic, and it can cause irritation to your eyes, skin, and lungs. It can also discolor your clothes, carpet, furniture, and other surfaces. Make sure that you put on goggles, gloves, and some old clothes before you begin. Also, make sure to put down some old newspaper or paper towels to protect your floors and other surfaces. If you work outside, then you will not have to worry about getting bleach on the ground.
Work in a well-ventilated area. Inhaling bleach fumes can irritate your lungs and may even give you a headache. Open a couple of windows and turn on a fan for ventilation if you will be working indoors. You may even consider working outside since it is well ventilated.
Choose a dark or bold color shirt. It is important to use a colored t-shirt for this project because bleaching a white t-shirt will only make it look whiter. The darker the color of your shirt is, the more dramatic your results will be. Stick with bold and dark colors, such as black, blue, red, purple, orange, green, etc. Steer clear of lighter shades and pastels, such as lavender, powder blue, light pink, cream, and light gray.
Comments
0 comment