Empty and rinse a baby shampoo bottle. Or, you can use nearly any bottle that has a wide body. Clean it out completely and make sure that the bottle is dry before moving to the next step.
Cut out the holder. Make one cut on the front of the bottle, halfway down. Only cut out the front of the bottle so that the back remains intact. Slice off the top of the bottle and round out the top to create an upside down “U” shape.Make a Cell Phone Charger Holder Step 2Bullet1.jpg Add a hole or opening to the middle of the “U.” The hole will allow you to hang the holder from the adapter, so consider using the adapter's shape to guide you in perfecting the size.Make a Cell Phone Charger Holder Step 2Bullet2.jpg
Size and cut the fabric. Measure the bottle to determine how much fabric you will need. Mark the dimensions on the fabric, then cut out the pattern.
Apply the fabric to the bottle or holder. Wrap the holder with the fabric using hot glue. You may need to trim away fabric pieces as you go but wrap the back first, then bring the fabric around to the front and join it underneath the bottle. Cut the fabric around the hole or opening and add more hot glue to secure it in place.Make a Cell Phone Charger Holder Step 4Bullet1.jpg
Allow the holder to dry completely before use. Done!
Comments
0 comment